Tattu brand batteries Specifically for UAV use, the Tattu brand has designed new batteries of unrivalled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy rigs for computing applications. Batteries often look similar from the outside - their real strength, however, lies inside. The cells in Tattu batteries are developed specifically for UAV requirements. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium polymer pack charging mode.Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers Voltage 3,7 V Capacity 500 mAh Number of cells 1 Connector type JST-PHR Balancer plug type JST-XH Discharge current (continuous) 95C Discharge current (peak) 190C Length 60 mm Width 19 mm Height 9 mm Weight 15 g

Product description Voltage - 22,2 V Capacity - 9000 mAh Number of cells - 6Connector type - EC5Type of balancer - JST-XHRDischarge current - 25CLength - 208 mm Width - 73 mm Heigth - 37 mm Weigth - 1110 g   Safety manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers.

Figyelem! A fotó illusztráció! A termék a valóságban eltérő lehet!!

Product description Voltage - 22,2 V Capacity - 16000 mAh Number of cells - 6 Connector type - AS150+XT150 Discharge current - 15C Type of balancer - JST-XHR Length - 202 mm Width - 88 mm Heigth - 69 mm Weigth - 2063 g Product code - TAA16K6SP15AX Safety manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers.

SkyRC Speed Meter GSM-015 With the GSM-015 from SkyRC, you can easily check the speed at which your car is going, check how high your drone or plane is flying, as well as save your route and export to Google Earth. The GSM-015 is more than just a speedometer - it is an extremely advanced and precise device enclosed in an ultra-compact housing and weighing just 45 grams. The high-precision GPS chip performs rapid position determination and provides real-time speed and ceiling information. The gadget is designed for racing model cars, drones, aircraft (attachment with Velcro straps is recommended), cycling, driving and long journeys. The user can easily read data such as speed, absolute altitude, longitude and latitude. The device records the highest speed and altitude, which can be checked immediately after the ride. Using the GPSlogger programme (downloadable  here), the user can transfer their position data to a computer and export to Google Earth/Map Bing. Simultaneous GPS and GLONASS reception The DGSM-015 supports GPS and GLONASS simultaneously, giving it access to a much larger number of satellites orbiting the earth. This allows much higher positioning accuracy by tracking the positions of two sets of satellites, instead of just GPS. The built-in 1M memory allows up to 18 hours of route storage at an update rate of 1 Hz. The position update frequency is adjustable from 1 Hz to 10 Hz. Features Speedometer with memory for top speed Peak memory Storage of GPS co-ordinates of the route Built-in 1M flash memory (enough for 2 hours of route recording) Time stamp for each saved point Built-in 200 mAh LiPo rechargeable battery (operating time - 150 minutes) Supports Google Eath / Bing maps Software upgradeable GNSS GPS, GLONASS Frequency L1, 1575.42 MHz Update frequency 1.023 MHz Antenna Built-in Satellite reception sensitivity -167 dBm Operating temperature 0℃ to +50℃ Storage temperature -10℃ to +70℃ Weight 45 g Dimensions 65.7 x 39.6 x 20.8 mm Operating humidity 5 - 90% Max. length of recorded track 10 Hz - 1:48'22"; 5 Hz - 3:36'44"; 2 Hz - 9:1'52"; 1 Hz - 18:3'44"

Product description Voltage - 22,2 V Capacity - 22000 mAh Number of cells - 6 Connector type - AS150+XT150 Discharge current - 30C Type of balancer - JST-XH Length - 206 mm Width - 91 mm Heigth - 61 mm Weigth - 2460 g Product code - TAA22K6S30ASX Old product code - TA-30C-22000-6S1P-AS150 Safety manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers.

Tattu 16000mAh 22.2V 30C 6S1P LiPo AS150+XT150 battery. Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Manufacturer Tattu Manufacturer code TAA16K6S30ASX Voltage 22,2 V Capacity 16000 mAh Number of cells 6 Connector type AS150+XT150 Discharge current (continuous) 30C Balancer type JST-XHR Dimensions 190 x 76 x 65 mm Weight 1974 g

Simple and sure SkyRC BD250 is a discharger and battery tester in one. The device displays battery voltage, discharged charge and discharge current in real time. The maximum discharge current is as much as 35 amps and the maximum discharge power is 250 watts. The BD250 also accurately measures capacity so you can choose the most appropriate battery for your needs. You can be sure that with the SkyRC discharger you will maintain optimal performance and lifetime of your batteries. Updated version The BD250 is based on the BD200 model. It combines a stylish design with high performance and advanced technology to ensure constant discharge of 250 watts. Not just unloading SkyRC BD250 allows you to test batteries of any type with 5.4 V up to 35 V. The device has a built-in fan, which is part of an advanced cooling system, ensuring optimal operation of the device, even when discharged at full power. Comfortable operation The knob on the front panel allows you to easily change parameters that can be read on the LCD display. Software Thanks to dedicated PC software, the BD250 allows you to export battery voltage values in 30-second intervals (for the first 6 minutes). Included: BD260 Unloader Unloading cable with connector XT60 Fuse Dimensions 136,6 x 104,8 x 107 mm Weight 879 g Range of supported voltage 5,4 V - 35 V Power of unloading 250 W Unload current 0,01 A - 35 A Accuracy of the displayed current 0,01 A - 10 A ±60mA / 10 A - 35 A ±3% Accuracy of the displayed voltage 5,4 - 10 V <80mV / 10- 20 V <120mV / 20 - 35 V <160 mV App DisCharger V1.07

Tattu 450mAh 14.8V 75C 4S1P battery Specifically for UAV use, the Tattu brand has designed new batteries with unrivaled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy rigs for computing applications. Batteries often look similar from the outside - their true strength, however, lies on the inside. The cells in Tattu batteries are developed specifically for UAV requirements.   Safety manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode. Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 14,8 V Capacity 450 mAh Number of cells 4 Connector type XT30 Type of balancer JST-XHR Discharge current 75C / 33,75A Length 45 mm Width 24 mm Heigth 27 mm Weigth 55 g

FlySky FS-X8B receiver Diversity receiver with AFHDS 2A modulation, operating on 2.4GHz. Works with NV-14 Nirvana, FS-i6X or FS-i10 from FlySky, among others. PPM / i-Bus / S-Bus.

For the most demanding portable chargers The eFuel 200W power supply from SkyRC is designed for mobile DC chargers with high charging power. The unit converts standard alternating current from any mains socket (100-240 volts) to 12 volts DC at up to 17 amps. Despite its small size, the device is extremely powerful and useful for any RC model hobbyist. Particularly recommended for SkyRC B6 Lite SkyRC B6 Nano chargers. Safe and reliable A wide range of different safety features ensure exceptional user safety - protection against output circuit short-circuit, over-current, over-temperature, over-voltage and power supply overload. An intelligent cooling system effectively protects the unit from overheating. The LED switches off when the connected device draws more power than it should. In such a situation, the power supply will cut the current to protect the circuits and then reset itself automatically. Active PFC Active power factor correction (PFC) reduces interference when supplying AC power. By altering the waveform of the current drawn, the power factor is improved, resulting in higher energy efficiency of the device. Quality put to the test Every eFuel 200W power supply is subjected to dozens of tests, far beyond industry standards. Drop, tilt, vibration, wear and tear, high temperature and low temperature tests are meticulously performed and so we can be sure that we are getting a top quality product. SkyRC products comply with all standards and regulations of the countries in which they are sold. SkyRC products are designed, tested and approved for sale to meet worldwide safety standards. Included: eFuel 200W power supply Power cable Dimensions 112 x 710 x 40 mm Weight 380 g Power supply 100 V - 240 V Output current 17 A Output voltage 12 V DC ±0.5V Energy efficiency 93% Thermal protection >105℃ Cooling Fan

FlySky FS-X6B FS-X6B to 6-kanałowy odbiornik dwukierunkowy z dwoma antenami. Urządzenie korzysta z protokołu AFHDS 2A na częstotliwości 2,4 GHz. Odbiornik obsługuje 6 kanałów wyjściowym PWM, PPM i i-BUS, co daje łącznie aż 18 kanałów. Urządzenie jest proste w instalacji i posiada bogaty interfejs z gniazdem czujnika napięcia. Wymiary 36 mm x 27 mm x 7.5 mm Waga 4,5 g Długość anteny 93 mm (dual) Ilość kanałów 6 Czułość  1024 Częstotliwość pracy 2,4 - 2,48 GHz Modulacja GFSK Zastosowanie Samolot, helikopter, quadcopter

Gens Ace 6900mAh 3.8V 1C 1S2P LiPo battery Featuring high durability and excellent performance, they will meet the requirements of any even the most ardent RC modeler. Specially for RC racing cars, Gens Ace brand has designed batteries. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit terminals, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 3.8 V Capacity 6900 mAh Number of cells 1 Discharge current 1C Length 69 mm Width 49 mm Height 20 mm Weight 122 g Producer code GEA69001STXJR

Gens Ace LiPo battery Batteries of unrivalled quality. They offer exceptional power whether you are using smaller drones for recreational use or heavy rigs for commercial applications. Batteries often look similar from the outside - their true strength, however, lies within. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium polymer pack charging mode.Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers Voltage 7,4 V Capacity 3500 mAh Number of cells 2 Connector type FUTABA Balancer type JST-XHR Discharge current 1 C Length 96 mm Width 44 mm Height 14 mm Weight 140 g

Product description Voltage - 7,2 V Capacity - 2200 mAh Connector type - TamiyaLength - 138 mm Width - 48 mm Heigth - 25 mm Weigth - 292 g NiMH type battery pack with Tamiya plug is a product suitable for use with RC cars and tanks.  

Tulajdonságok:Ez a kiegészítő lehetőséget ad arra, hogy plusz két játékossal kiegészülve megvédjétek Catant a barbároktól. A kiegészítő további figurákon kívül plusz alkatrészeket is tartalmaz, és kiegészül néhány új játékszabállyal. Kor: 12 éves kortól Játékosok száma: 5–6 fő Játékidő: 120 perc

Gens Ace 4000mAh 7.4V 1C LiPo battery Batteries of unrivaled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy platforms for commercial applications. Batteries often look similar on the outside - but their real strength lies on the inside.   Safety manual Do not discharge below 3.0V per cell.Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 7,4 V Capacity 4000 mAh Number of cells 2 Connector type EHR Type of balancer JST-XHR Discharge current (continous) 1 C / 4 A Length 72 mm Width 52 mm Heigth 20 mm Weigth 148 g Compatibility Spektrum DX9, DX8, DX7S, DX7 and Futaba

Gyroscope For RC Car Models SkyRC Gyro GC301 SkyRC GC301-Gyro is dedicated for RC cars. The device uses a gyro sensor and a special algorithm to adjust the position of the wheels for even better stability and handling characteristics. The GC301 makes the model even more maneuverable and easier to control. It is also extremely lightweight and small, so it can be used on models of any scale without worrying that it will prove too heavy or significantly increase the weight of the model. Key features Adjustable steering for even better control. With this solution, cornering is possible at even higher speeds, and the model itself is even more stable while driving. Remote control allows you to adjust the power via a 3-channel transmitter or via a trimmer on the unit. Opis elementów GC301 Manufacturer SkyRC Model SK-600142-01 Operating voltage 4 - 8.4 V Current consumption 25 mA Operating temperature range from -10ºC to +45ºC Weight 3.6 g

SkyRC E3 LiPo charger SkyRC E3 is a universal charger dedicated to LiPO 2-3 S packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 3 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connection to 230 V mains power. Included: E3 charger Power cable Manufacturer SkyRC Model SK-100081-6 Power supply AC 100-240VC,50-60Hz Battery type LiPo Number of chargeable cells 2-3 cells Charging current 1.2 A Max Final voltage per cell 4.2V ± 0.02V Circuit power supply 11W ± 10% Dimensions 88 x 57 x 35 mm Weight 103 g

SkyRC e450 2-4S / 6-8S LiPo / LiFe / LiHV / NiMH charger SkyRC E450 is a universal charger dedicated to 2-4 S LiPO/LiFe/LiHV and 6-8S NiMH packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 4 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connecting to 230 V mains power. Included: E450 charger Power cable XT60 cable terminated with bananas Manufacturer SkyRC Model SK-100122-02 Power supply AC 100-240V LiPo/Li-Fe/LiHV/NiMH battery type Number of chargeable cells 2-4 / 6-8 for NiMH Charging current 4 A Max ± 10% Final voltage per cell: LiPo 4.2V ± 0.02V LiFe 3.6V ± 0.02V LiHV 4.35V ± 0.02V NiMH -ΔV Circuit power supply 50W ± 10% Dimensions 110.7 x 69.4 x 40.5 mm Weight 220 g

Product description SkyRC universal temperature sensor is used in modeling chargers. It fits all SkyRC chargers that have a temperature sensor socket and Hitec chargers. (X2 400, x1 Touch, X1 AC Plus, X4 AC Plus, H4 4x120W)

Gens Ace 4000mAh 22.2V 60C 6S1P EC5 battery Batteries of unrivaled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy platforms for commercial applications. Batteries often look similar on the outside - but their real strength lies on the inside.   Safety manual Do not discharge below 3.0V per cell.Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 22.2V Capacity 4000 mAh Number of cells 6 Connector type EC5 Type of balancer JST-XHR Discharge current (continous) 60C / 240A Discharge current (peak) 120C / 480A Length 164 mm Width 46 mm Heigth 43 mm Weigth 689 g

Product description Voltage - 7,2 V Capacity - 3000 mAh Connector type - TamiyaLength - 139 mm Width - 48 mm Heigth- 25 mm Weigth - 356 g NiMH type battery pack with Tamiya plug is a product suitable for use with RC cars and tanks.  

Voltage meter SkyRC LiPoPal is a simple battery tester and voltage balancer. When flying outdoors, it is difficult to determine the remaining capacity of a battery. This small device allows you to check the voltage of each cell and determine the remaining charge by percentage anytime and anywhere. As we know, if the cells of the pack are balanced, the operation of the battery is much better and the life is longer. But sometimes we may not have the time or tools to balance the cell voltage. This small device, upon detecting the voltage imbalance, will immediately start balancing them. Included LiPoPal Adapter Hand strap Weight 23 g Dimensions 70 x 38 x 11 mm Accuracy of voltage measurement 0,01 Displayed voltage range 0-5 V Balancing current 50 mA