Charger SkyRC Q200neo The innovative SkyRC Q200neo charger is the perfect choice for every RC enthusiast. It allows you to charge 4 different batteries simultaneously and can be powered by both direct current (DC) and alternating current (AC). It stands out with a power of up to 400 W and a built-in high-precision balancer that optimizes voltage equalization within ±0.02 V. Despite its powerful capabilities, the product is surprisingly compact and portable. Charge 4 Batteries Simultaneously The Q200neo charger allows you to charge batteries with different chemical compositions, such as LiPo, LiFe, Li-Ion, LiHV, Pb, NiMH, or NiCd. This makes you ready for any situation, whether you are an RC professional or an amateur. You also don't have to worry about the device overheating. The charger is equipped with an advanced thermal system with a fan, allowing it to efficiently dissipate heat and maintain an optimal temperature. Two Power Options Enjoy greater flexibility – whether you are working in your garage or out in the field. The charger allows you to choose between AC and DC power sources, so you can use it in various scenarios. In AC mode, the device can reach up to 200 W of power, while in DC mode, it can go up to 400 W. With up to 100 W per port, you can charge your batteries in record time. Intelligent Energy Distribution If you choose AC power and use only two ports, the charger will provide maximum power to them. When using all four ports, energy will be dynamically and intelligently distributed among each of them. When one of the batteries is already charged, the Q200neo model will start charging the others even faster. This ensures optimal charging performance in almost any situation. Discharge Function and Digital Power Supply Whether you want to prepare your batteries for storage, balance their voltage levels, or discharge them after use, the SkyRC charger is here to help! The device allows for quick and safe discharge with a power of up to 25 W. You can easily take care of your battery's health and extend its lifespan. The Q200 neo model also serves as a versatile digital power supply with four outputs. It allows you to adjust the voltage in the range of 1-30 V with a precision of 0.1 V. You can also set the current from 0.1 A to 10 A with a precision of 0.1 A. This makes it an ideal solution for various testing and prototyping applications in RC modeling! Thoughtful Design Impressive performance, up to 4 independent battery charging ports, and the ability to power it in two ways – all packed into a convenient, compact design. The Q200neo charger is 60% lighter than its predecessor, the Q200. It also stands out with a modern design and distinctive color. Moreover, the product uses a special MCU (Microcontroller Unit) module that precisely controls charging, minimizing energy losses. It is also protected against short circuits, overheating, and overvoltage, and its housing is made of flame-resistant material. Additional Features The charger is equipped with an additional USB-C port that supports fast PD 3.0 20 W charging. So, you can quickly charge your smartphone, tablet, or even laptop! The Q200neo model also has a built-in ARM 200 MHz microcontroller, which improves the ADC (Analog-to-Digital Converter) resolution to 16 bits. Furthermore, the efficient PID (Proportional-Integral-Derivative) mechanism allows precise current tuning, increasing charging speed. The charger will also come in handy during your travels – its input circuit has universal voltage, so you don't need a 110V – 220V converter when you're abroad! Convenient Operation The charger is very user-friendly and easy to operate. Its clear interface is available in multiple languages, including English and French. Convenient device control is made possible by the dedicated Charge Master application, which can be installed on a computer or smartphone. It allows you to adjust charging parameters, check battery conditions, and update the charger's firmware, among other functions. The Q200neo model can connect to devices in two ways – via a USB-C cable or wirelessly through Bluetooth. In the box Charger AC Power Cable User Manual Brand SkyRC Model Q200neo Display Type TN Display Size 2.8" Active Panel Area 43.2 x 57.6 mm Screen Resolution 240x320p Number of Colors 262k DC Input Voltage 10-30 V AC Input Voltage 100-240 V Charging Power AC: Up to 200 W;DC: Up to 400 W; Discharge Power Main Port: 5 W;Balance Port: Up to 25 W (LiPo/6S); USB-C Port QC3.0: 5 V - 3 A, 9 V - 2 A, 12 V - 1.5 A, 18 W;PD: 5 V - 3 A, 9 V - 2.2 A, 12 V - 1.67 A, 20 W; DC Power Output Output Voltage: 1-30 V;Output Current: 0.1-10 A;Output Power: Up to 100 W per port; Compatible Batteries LiPo / LiHV / LiFe / Li-Ion: 1-6 cells;NiMH / NiCd: 2-15 cells;Pb: 3S / 6S / 12S; Charging Current LiPo / LiFe / Li-Ion / LiHV / NiMH / NiCd / Pb: 0.1-2 A; Balancing Current LiPo / LiFe / Li-Ion / LiHV: Up to 800 mA; Functions LiPo / LiFe / Li-Ion / LiHV: CHG balance, charge, discharge to storage;NiMH / NiCd: charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, discharge;Pb: charge, AGM charge, Cold Charge, discharge; Material PC-ABS V0 Dimensions 123 x 119 x 78 mm Weight 680 g Application Charge Master

Tattu batteries Specifically for UAVs, the Tattu brand has designed new batteries of unrivalled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy rigs for computing applications. Batteries often look similar from the outside - their real strength, however, lies inside. The cells in Tattu batteries are specifically developed for UAV requirements Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 14,8 V Capacity 650 mAh Number of cells 4 Connector type XT30 Balancer type JST-XH Discharge current (continuous) 95C Length 60 mm Width 31 mm Height 25 mm Weight 80 g

Real power SkyRC has specifically designed a tool for remote control model enthusiasts to measure their speed and other data. The GSM020 allows you to connect to an app where you can monitor real-time data or their history. Simply attach the device to any car, drone or aircraft and hit the road. High accuracy GSM020 supports GNSS- GPS and GLONASS satellite navigation systems, allowing for very high positioning accuracy. The device allows measurement of acceleration, G force, speed, time, distance and more. 5 hours of operation with LiPo battery Thanks to the built-in lithium-polymer battery, which allows up to 5 hours of uninterrupted operation, you don't have to worry about the device's short runtime. You can then easily recharge it via the micro USB port. Mobile app The free GNSS PA app allows you to track the device's speed remotely from your iOS or Android phone. Built-in Bluetooth 4.0 allows real-time data monitoring. Three modes: Drag, Track and Flying allow you to analyse your driving or flying route with ease. All data in one place The GNSS PA app automatically creates graphs. Laps on the track can be analysed in the app for average speed, maximum speed, acceleration at a given time and distance. Set your own time/distance range to check braking speed, accelerations up to 30 km/h, G-forces. Check altitude, speed, time and distance in flying mode. Built-in 1 Mb memory The built-in memory allows 50 records to be stored. Data can be easily transferred to a smartphone. When the flash memory is full, the oldest records will be automatically overwritten. There is no longer any need to remember to delete data or worry that key data will not be saved when the memory is full. Satellite reception sensitivity -167 dBm Update frequency 10 Hz Receiver L1, 1575.42 MHz Operating temperature 0 - 40°C Antenna Built-in Weight 35 g Dimensions 39 x 40 x 16 mm

SkyRC D200neo Charger Get acquainted with the D200neo, a device that provides instant charging with up to 35A of current. It is designed to save users' time, as it is always ready to go. This advanced device is comfortable to use, thanks to its built-in color display. In addition, it intelligently and dynamically distributes charging power. The D200neo also supports USB-C 3.0 Power Delivery (PD), enabling faster and more efficient charging. Fast and smart charging The D200neo provides dual-port parallel charging with a lightning fast charging current of up to 35A. It is designed to save your time to the maximum. This device is always ready for action! Thanks to an innovative combination of software and MCU, D200neo provides supercharging. It also intelligently and dynamically distributes charging power when both ports are active simultaneously. When only one port is active, D200neo will direct all its power to that one port, guaranteeing optimal and fast charging. In addition, it also supports USB-C 3.0 Power Delivery (PD) for even faster and more efficient charging. More options The SkyRC device is equipped with dual ports that operate independently, providing efficient and simultaneous charging of two batteries. What's more, the D200neo offers the flexibility to choose between AC and DC input, adapting to different scenarios. In AC mode, it provides charging power of up to 200W, while in DC mode, the output increases up to 800W. In addition, you can choose DC charging at 800W for the greatest efficiency, or use AC charging at 200W to tailor its performance to your specific needs. The D200neo is an absolute revolution in the world of RC chargers. Professional charger The D200neo is not only a professional charger, but also a high-quality digital power supply. At the click of a menu, the D200neo is ready to go, offering optimal voltage from 5-27V with 0.1V increments and adjustable current from 1 to 15A. Additional protections against short circuit, overload and reverse polarity ensure safety and peace of mind during use. What's more, the D200neo is equipped with a 200 MHz ARM microcontroller, which is able to increase the resolution of the ADC to 16 bits thanks to its oversampling technology. A powerful PID mechanism precisely adjusts the current, providing a responsiveness and accuracy of charging current that is unmatched by most standard devices on the market. All information at your fingertips SkyRC has a built-in display with ColorX interface, which makes the information presented in color, making it much easier to operate the device. When working with the BD350, the D200neo can use the customized SkyRC Charger Master to display or export the battery discharge curve in real time. This makes it possible to compare and analyze the discharge curves of different batteries to accurately detect faulty batteries. NOTE: The BD350 and SkyRC Charger Master are not part of the kit. Thoughtful design Thanks to its universal input voltage circuit, you can take the SkyRC device with you on any trip, no matter where you go! In addition, this product is designed and approved to meet global standards for safety, electromagnetic compatibility and other mandatory regulatory requirements. With SkyRC, you are always ready to travel! Easy control The D200neo, connected to a PC or Mac via USB-C, allows monitoring and control via the SkyRC Charger Master app. You can also update the charger as OTA and synchronize the latest software in real time with a dedicated cloud. Charging and discharging data can be analyzed and displayed in a graph. The interface is currently available in English, Dutch, Chinese, French and Japanese. Users can easily change it with simple clicks, making SkyRC use even more convenient. Manufacturer. SkyRC Model SK-100196 Dimensions 116 × 110 × 79 mm Material Plastic Weight 602 g Display type TN Display size 2.8-inch Resolution 240 x RGB x 320 pixels Number of colors 262 thousand. DC input voltage 10-30 V AC input voltage 100-240 V Charging power AC: 100 W MAX. * 2; DC: 400 W MAX. * 2 QC3.0 port 5V⎓3A, 9V⎓2A, 12V⎓1.5A 18W PD port 5V⎓3A, 9V⎓2.2A, 12V⎓1.67A 20W

SkyRC MC3000 AA / AAA charger The MC3000 charger was born out of SkyRC's need for a versatile, precise and powerful charger tailored for single-purpose cylindrical batteries. With this product, you will no longer experience problems with cages, wiring, terminals and other DIY solutions. Unique charger MC3000 was designed out of the need for a versatile, precise and powerful SkyRC charger tailored for single-target cylindrical batteries. With this charger, you will no longer experience problems with cages, holders, cumbersome wiring, clamps and similar DIY solutions. The MC3000 is customized for a wide range of sizes (over 42) and types (over 7) of batteries that charge at 3 A and discharge at 2 A. Functionality and safety The charger has 6 modes of operation - charging, discharging, refreshing, forming (for NiMH, NiCd, Eneloop only), charge-discharge cycle and storage (for Lixx only). Rubber feet and a 10° tilt allow a better view of charging and increase cooling efficiency at the bottom of the charger. Charger safety is ensured by multiple types of limits - time, voltage, capacity, etc. Efficient cooling Built-in two aluminum fans effectively get rid of the heat generated by the charger. The cooling ensures efficient air exchange, even at low operating speed. Easy-to-read display The 128x64 pixel screen shows 5 different work tabs. 8 Buttons guarantee simplicity of programming and operation of the device. 4 numbered buttons represent the corresponding battery slot. The remaining buttons are used to operate the charger. The device allows you to save up to 30 charging profiles, which can be called up and used for the current charge at any time with a few clicks. Included: Charger Power adapter Manufacturer SkyRC Model SK-100083-02 Charging current 0.05 A - 3 A Delta Peak 1 - 20 mV Discharge current 0,05 - 2 A Battery capacity 500 - 50000 mAh Number of cycles 1 - 12 Final charging current 100 mAh Operating temperature 0°-40°C Supply current 12 V / 2.5 A USB current 5 V / 2.1 A Weight 600 g Dimensions 200 x 124 x 69 mm

Unrivalled industrial drone charger SkyRC PC1080 is a dual channel charger for industrial applications charging 6S lithium-polymer batteries. The charger is very safe and easy to use with a wide range of additional functions such as voltage meter, internal resistance meter, LiHV charging mode and synchronization mode. Power and durability Advanced mechanical design serves to save space. The best components of well-known brands guarantee stability and durability. The 32-bit high speed processor with STM icroelectronics has up to 20 times the processing capacity. High-quality, large capacitors guarantee a long device life, while the condenser coating helps to withstand harsh environmental conditions and protects against moisture, dust, chemicals, corrosion and extreme temperatures. All these features make for an extremely stable charger operation in the field. Active PFC Active PFC (Power Factor Correction) uses device circuits to correct the amount of power consumed in such a way as to obtain the best power factor, achieving an efficiency of 93% (23% better than without PFC). Automatic charging of 12 batteries After pairing the charger with G630 charging hubs, automatic charging management systems, the PC1080 is able to charge 12 LiPo batteries one by one according to their level of charge. The batteries with the highest level of charge will be charged first.  Advanced mechanical design serves to save space. The best components of well-known brands guarantee stability and durability. The 32-bit high speed processor from STMicroelectronics has up to 20 times the processing speed. Effective cooling High speed double bearing fan with aluminium fin-type heat sink provides excellent ventilation and stable temperature necessary for the most efficient operation. Chargers synchronization The charger synchronization function allows users to control two or more chargers simultaneously over the data cable. All SLAVE chargers will mimic the parameters of the MASTER charger, which significantly reduces the charging time of many similar batteries. Internal Resistance Meter With this function, the internal resistance of each cell is displayed on the screen. The internal resistance is a key element, signaling the condition of the battery. A lower resistance indicates higher quality batteries. In addition, this value helps to pair your batteries. Included Specification PC1080 chargerAC power cableData cable                                   Dimensions: 272 x 202 x 37 mmWeight: 4.88 kgCharging power: 1080 W (2x 540 W)Discharge power: 100 W (2x 50 W)Charging current: 1 A - 20 A x 2Balancing current: 1,2 ABattery type: LiPo/LiHvOperating modes: charging with balancer, storage mode, charging mode Number of loaded cells: 6 S

UGREEN 30768B Switch Box, USB 3.0 The UGREEN Switch Box is a functional adapter with up to four USB 3.0 inputs and two USB terminals that offer the ability to connect it to two different devices. It allows you to share access to four USB devices between two computers. Efficient control and multifunctionality With the ability to manage files from two computers simultaneously, you can easily and quickly control them between devices. The adapter gives you the ability to connect all devices and storage media that have a USB end. Included: Switch x1 USB 3.0 cable x2 Manufacturer UGREEN Model 30768B Interfaces 4x USB 3.0, 1x micro USB Material Plastic Data transfer speed Up to 5 Gbps Color black

Tattu Funfly 1300mAh 22.2V 100C 6S1P XT60 Battery. New Funfly Series of batteries dedicated to racing quadrocopters thanks to the discharge current as high as 100C. They will be appreciated by beginners as well as professional pilots. This battery is a perfect balance of power and light weight. Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit the terminals, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 22,2 V Capacity 1300 mAh Number of cells 6 Connector type XT60 Balancer type JST-XHR Discharge current (continuous) 100 C Length 75 mm Width 36 mm Height 44 mm Weight 225 g

Gens Ace Accumulators Gens Ace's Soaring Series batteries are designed for helicopters and aircraft. They provide stable power and will perform well even in harsh conditions. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers Voltage 7.4 V Capacity 3300 mAh Number of cells 2 Connector type XT90 Balancer plug type JST-XHR Discharge current 30C Length 132.5 mm Width 42 mm Height 13.5 mm Weight 183 g

Baseus ComfortRide Series Car lumbar cushion (black) Increase your comfort while riding in the car and maintain a health-friendly posture with the Baseus Comfort Ride lumbar cushion. The product with its ergonomic butterfly-shaped design will provide effective support for your back. The cushion is made of foam, which is soft and not susceptible to marks of use - it will surely serve you for a long time! For the sake of health Staying in a sitting position for a long time can cause discomfort. It is important to pay attention to maintaining the correct posture. The Baseus Comfort Ride butterfly-shaped lumbar cushion will make this task easier for you! Using the cushion will allow you to travel comfortably by car without experiencing pain. The product will also work great in the office and at home. Attention to detail The Baseus brand lumbar cushion is made of high-quality materials, making it very durable and not susceptible to marks of use. As a result, it will retain its flexibility and impeccable appearance for a long time. The use of polymer cooling gel and breathable textile material achieved the effect of absorbing and dissipating excess heat, providing improved ventilation. The zipper makes it easy to clean and possibly change the pillowcase. Manufacturer Baseus Name Baseus ComfortRide Series Car Cooling Lumbar Pillow Model C20036402111-01 Dimensions 395 x 263 x 115 mm Weight Approximately 780 g Color black

Tattu R-Line 5.0 1400mAh 22.2V 150C 6S1P XT60 battery. Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit the terminals, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. During the production of the battery, X AI Boehmite technology was used. What's more, the product provides constant and continuous power output and ensures less performance loss after cycles. In addition, it is resistant to drops. Manufacturer Tattu Model TAA14006S15X6 Voltage 22.2 V Capacity 1400 mAh Number of cells 6 Balancer plug type JST-XHR Connector plug type XT60 Discharge current (continuous) 150C Discharge current (peak) 260C

Funfly battery The new Funfly battery series dedicated to racing quadrocopters thanks to a discharge current as high as 100C. They will be appreciated by beginners as well as professional pilots. This battery is the perfect balance of power and light weight. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode. Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 11,1 V Capacity 1550mAh Number of cells 3 Connector type XT60 Balancer type JST-XHR Discharge current (continuous) 100C Length 73 mm Width 36 mm Height 28 mm Weight 140 g

Product description Voltage - 11,1 V Capacity - 650 mAh Number of cells - 3Connector type - XT30Type of balancer - JST-XHDischarge current (peak) - 75C  Length - 58 mm Width - 31 mm Heigth - 16 mm Weigth - 59 gProduct code - TA-75C-650-3S1P   Safety manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers.

Product Description Voltage - 7.4 V Capacity - 1800 mAh Number of cells - 2 Connector type - XT60Balancer type - JST-XHR Discharge current (continous) - 45C Length - 90 mm Width - 30 mm Heigth - 17 mm Weigth - 111 g Product Code - B-45C-1800-2S1P-XT60   Safety Manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit, do not puncture, do not expose to direct sunlight, store away from flammable items, dispose of in specially prepared containers.

Product description Voltage - 7.4 V Capacity - 2200 mAh Number of cells - 2 Connector type - XT60 Type of balancer - JST-XHR Discharge current - 60C Length - 82 mm Width - 34 mm Heigth - 19 mm Weigth - 116 g   Safety Manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers.

FlySky Elysium EL18 transmitter + TMR receiver set FlySky kit consists of EL18 transmitter and TMR receiver. It is equipped with 18-32 channels. It allows you to customize the operation of the control sticks and buttons, and the easy-to-read 3.5-inch display provides the most important information about the operation of the device. The transmitter is distinguished by an improved power management module, as well as impressive stability, speed and longer range (up to 3,500 meters), made possible by the upgraded AFHDS3 protocol. High-performance antennas are also responsible for a reliable signal. Both components operate in the 2.4GHz band. The kit is suitable for racing drones, fixed-wing aircraft, gliders and rotorcraft, among others. Upgraded protocol Most noteworthy is the FlySky AFHDS 3 (Third Gen Automatic Frequency Hopping Digital System) frequency protocol, which is compatible with one-way and two-way real-time packet transmission and transparent data stream modes using the new 2.4G chip. You can individually create your RF remote control system to achieve your dream remote control distance of up to 3,000 meters. You'll do this by setting the number of RF transmission channels, as well as adjusting anti-interference and transmission delay requirements. Easy-to-read display The EL18 features a 3.5-inch IPS-matrix touchscreen display with high brightness levels and high sensitivity. What's more, the transmitter is equipped with a USB-C interface and supports direct connections to DCL, DRL and Phoenix RC (via USB). It also provides an updated power management module, and RF power reaches up to 2 W. Convenient function management The EL18 uses the EdgeTX system with built-in FlySky RC technology. What does this mean in practice? Users can customize even more functions based on the original FlySky features. What's more, the transmitter works with the latest FlySky RF modules, making it possible to adjust the RF module's parameters remotely. In addition, the serial port will allow you to enjoy instant communication between the RF module and the transmitter. Functionality and convenience The robust Hall stick mounting bracket is distinguished by its long service life, which reaches up to 100,000 uses. Both the left and right throttle channels can be adjusted. You can also easily adjust the friction force. You can also adjust the mounting bracket to suit your needs. That's still not all - the EL18 transmitter has a built-in third-generation FRM301 radio frequency module and supports multiple RF communication protocols. It adapts to the main RF modules on the market, with power reaching up to 2 W. The device supports CRSF2 protocols and the CRSF RF module. It can work with most third-generation AFHDS receivers. TMR receiver The TMR model is a compact dual-antenna receiver that operates at 2.4 GHz. Its dimensions are only 16 x 12 x 2 mm, and it weighs only 0.9 g. It uses the modern AFHDS3 protocol and is compatible with EL18 and FS-PL18 transmitters. It supports RSSI power indicator and PWM, PPM, i.BUS and S.BUS output signals. Thoughtful design With its charming red color, the design of the EL18 transmitter will appeal to many users. The coating is the result of an optimized and upgraded electroplating process. The body is distinguished by its metallic style and the surface by its acrylic texture. Moreover, the ergonomic design of the handle and the surprisingly low weight of the device make the use of the product highly comfortable. Included: Flysky Elysium EL18 transmitter x1 TMR receiver x1 USB charging cable x1 User manual x1 Manufacturer FlySky Transmitter model EL18 Compatibility Classic version receivers such as FTr10 or FTr16s, etc.Enhanced version receivers such as FTr8B, FTr12B or TMR (included), etc. Compatible models Racing drones, fixed-wing aircraft, gliders, rotorcraft Number of channels 18 channels for internal RF32 channels for external RF Wireless frequency (RP) 2.4GHz ISM 2.4GHz protocol AFHDS 3 Power 20 dBm (max.) Antenna Two (built-in antenna + external rotating antenna) Input power 2x 18650 (rechargeable lithium-ion battery) Operating current 400 mA / 4.2V Data output USB-C Charging port USB-C Resolution 4096 Screen Color IPS touchscreen with 320 x 480 resolution Range Up to 3500 m (air distance without interference) Online update Yes Operating temperature From -10℃ to 60℃ Humidity range 20% to 95％ Display Yes, touchscreen, color, 3.5" Dimensions 205 x 183.7 x 82.9 mm Weight 726 g Certifications CE, FCC ID: 2A2UNEL1800, UKCA Color Red Receiver model TMR Compatibility EL18, FS-PL18 Wireless frequency 2.4GHz ISM Protocol AFHDS 3 Antenna Dual Input power 3.5-9V RSSI Supported Output signal PWM / PPM / i.BUS out / S.BUS Operating temperature From -10℃ to 60℃ Humidity range 20% to 95% Online update Yes Dimensions 16 x 12 x 2 mm Weight 0.9 g Certifications CE, FCC ID: N4ZTMR000

SkyRC D100neo Charger The SkyRC D100neo Charger is equipped with 2 ports, allowing simultaneous charging with a power of 200W when using DC power supply. It supports various types of batteries, including LiPo, LiFe, Li-ion, LiHV, NiMH, and NiCd, and provides voltage balancing function with an accuracy of ±0.02V. The device's performance is also influenced by the high-resolution color display and user-friendly interface, ensuring ease of use. The product is also equipped with a USB-C port with 20W Power Delivery for fast charging. Advanced protective features ensure safe operation. Impressive Power in a Compact Form Each of the D100neo ports supports a current of up to 10A, allowing for fast and efficient charging of 2 batteries simultaneously. Thanks to intelligent power management, the charger maintains stability and accuracy of charging even at full load, ensuring evenly charged cells and extending their lifespan. The device's output power is up to 200W (requires DC power supply), further increasing energy renewal efficiency. Despite impressive specifications, the product stands out with its compact design, being 40% smaller than standard chargers. It also features a color display with an impressive 76,800 pixels, providing convenient access to essential information. Optimal Power Management The SkyRC D100neo Charger combines efficient charging with up to 25W of power and advanced discharging with voltage balancing capability, ensuring optimal battery condition and longevity. The device automatically allocates power between the ports, maximizing the charging efficiency of individual batteries and providing fast charging when using both ports simultaneously. It also provides balancing accuracy up to ±0.02V, guaranteeing voltage optimization for each cell, crucial for extending their lifespan and maintaining full capacity. Versatility The D100neo can operate in both AC and DC modes. When powered by AC, power is dynamically distributed between the ports up to a total of 100W, while with DC power supply, each port can reach a full 100W, significantly speeding up the charging process. When both ports are used simultaneously, the charger intelligently manages available power. After one port completes charging, the other receives increased power, maximizing the efficiency of the entire process. Additionally, the device can function as a digital power source with adjustable voltage and current, making it suitable not only for hobbyists but also for electronics enthusiasts and DIYers. Fast Charging With the USB-C PD 3.0 port supporting up to 20W of power, RC model enthusiasts can enjoy significantly accelerated charging for their devices, such as smartphones, tablets, and 2020 MacBook Airs. Safety and User-Friendliness Protection against overcharging and overloading ensures complete safety during charger operation. An innovative thermal system allows the Arm Cortex-M4 processor to operate at high loads without generating disturbing noise. The ColorX interface guarantees ease of use and allows settings adjustments in multiple languages. Additionally, firmware updates can be performed smoothly and effortlessly through USB-C, ensuring that the device is always up to date with the latest software. Another advantage is the universal input voltage (from 110V to 220V), allowing you to take the D100neo model on your travels. Seamless Connection The USB-C port allows for convenient connection of the D100neo charger to a PC or Mac. Using the Charger Master app, you can customize charging parameters, monitor battery status, and optimize performance. Furthermore, software updates are performed smoothly, making it easy to enhance your charger's capabilities. Manufacturer SkyRC Model SK-100199-01 SIZE AND WEIGHT Case Material PC-ABS V0 Case Size 116 x 110 x 79 mm Weight 470 g DISPLAY Display Type TN Size 2.8 inches Panel Active Area 43.20 x 57.60 mm Resolution 240x320 pixels Number of Colors 262,000 POWER DC Input Voltage 10-30V AC Input Voltage 100-240V Charger Power AC: 100W MAX; DC: 200W MAX Discharge Power Main Port: 5W; Balance Port: 25W MAX (LiPo/6S) 20W USB-C Power Delivery Charging QC3.0: 5V⎓3A, 9V⎓2A, 12V⎓1.5A 18W; PD: 5V⎓3A, 9V⎓2.2A, 12V⎓1.67A 20W BATTERY Battery Types/Cells LiPo/LiHV/LiFe/LiIon: 1-6 cells; NiMH/NiCd: 1-15 cells; Pb: 3S/6S/12S CHARGE AND DISCHARGE Charge Current LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb: 0.2-10.0A Discharge Current LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb: 0.1-2.0A Balance Current LiPo/LiFe/LiIon/LiHV: 1.0A MAX Operation LiPo/LiFe/LiIon/LiHV: Balance CHG, Charge, Storage, Discharge; NiMH/NiCd: Charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, Discharge; Pb: Normal, AGM Charge, Cold Charge, Discharge

Tattu LiPo 300mAh 3.8V 75C 1S1P HV BT2.0.5 battery (5pcs). Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Manufacturer Tattu Manufacturer code TAA3001S75BT2 Previous manufacturer code TA-75C-300-1S1P-HV-BT2.0-5 Voltage 3.8 V Capacity 300 mAh Number of cells 1 Discharge current 75C Dimensions 69 x 13 x 7 mm Weight 57 g Number of pieces in the set 5

Gens Ace Accumulators Gens Ace's Soaring Series batteries are designed for helicopters and aircraft. They provide stable power and will perform well even in harsh conditions. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor charger in lithium-polymer pack charging mode. Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers Voltage 7,4 V Capacity 450 mAh Number of cells 2 Connector type JST-SYP Balancer plug type JST-XHR Discharge current (continuous) 30C Length 56.5 mm Width 31 mm Height 9 mm Weight 33 g

FlySky GT5 advanced transmitter and BS6 receiverThe FlySky GT5 transmitter is an advanced device designed for modeling enthusiasts, offering a wide range of functions and capabilities. Equipped with AFHDS 2A technology, the GT5 transmitter provides reliable connection and precise communication. With six channels at its disposal, the GT5 allows full control over various aspects of your model.Precise control and mobilityA unique feature of the GT5 transmitter is the steering wheel equipped with a bearing, which ensures smooth and precise control. In addition, the foldable antenna allows the transmitter to be conveniently carried and minimizes the risk of damage during transportation.Special modes for Crawler carsGT5 also features advanced modes explicitly designed for Crawler cars. SVC (Steering, Throttle, and V channel Control) functionality and haptic feedback guarantee even more control over the off-road vehicle. The ability to run on both battery (AA) and rechargeable lithium-polymer (2S) batteries provides convenience and flexibility in operation.Perfectly matched BS6 receiver"The BS6 receiver, which is part of the kit, is perfectly matched to the GT5 transmitter. It uses AFHDS 2A technology, which allows for a seamless and reliable connection. Featuring 6 PWM channels, the receiver allows a wide range of configuration and control over the device.Enhanced control with the BS6 receiverThe BS6 receiver's range of 100 to 300 meters on the ground provides freedom and confidence. An integrated single antenna with a range of 180 meters further enhances signal quality. The receiver operates in a voltage range of 4.0V to 6.5V, ensuring compatibility with various power sources. With RSSI (Received Signal Strength Indicator) support, the user has a constant view of the connection quality, which translates into safety and reliability. The PWM data port allows easy connection to various devices.Resistance to conditions and quality certificationsThe BS6 receiver also features exceptional weather resistance, allowing it to operate in temperatures from -10 ℃ to + 60 ℃ and humidity from 20% to 95%. Its compact size (29 22 16.2 mm) and light weight (7.6 g) make it non-intrusive and easy to install. CE, RCM and FCC ID: N4ZBS600 certifications confirm the kit's high quality and compliance with applicable safety and quality standards. In addition, the ability to update the software online ensures that your kit will always be up to date with the latest features and fixes.Product Model: FS-GT5 Channels: 6 Models: car, boat Wireless frequency: 2.4GHz Transmission: <20 dBm Wireless protocol: AFHDS 2A Range: 100 ～ 300m (ground) Channel resolution: 4096 Battery: 1.5AA * 4 Charging port: None Low voltage alarm: AA battery <4.4V, 2S lithium battery <7.4V Antenna type: external single antenna Display: NTN semi-transparent, segment code screen, VA52.5 * 34mm Temperature range: -10 ℃ — + 60 ℃ Humidity range:20% -95% Online update: No Color: Black Dimensions: 158 * 95 * 243mm Weight:296g Certification: CE, RCM, FCC ID: N4ZGT500Model produktu:FS-BS6Kanały PWM:6Częstotliwość bezprzewodowa:2,4 GHzProtokół bezprzewodowy:AFHDS 2AZasięg:100 - 300 m (na ziemi)Typ anteny:jedna antena (180 m)Zasilanie:4,0-6,5 VRSSI:ObsługiwanePort danych:PWMZakres temperatur:-10 ℃ — + 60 ℃Zakres wilgotności:20% -95%Aktualizacja online:TakWymiary:29 * 22 * 16,2 mmWaga:7,6 gCertyfikacja:CE, RCM, FCC ID: N4ZBS600

Tattu R-Line battery The Tattu R-Line 2200mAh 95C 5S1P battery is the best FPV lipo battery with high quality and reliable power. High C Rate supports fast flight, excellent battery technology makes the battery very durable and extends the battery range. Suitable for 7" long ranger & cinematic & Freestyler. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium polymer pack charging mode.Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers Voltage 18.5 V Capacity 2200 mAh Number of cells 5 Discharge current 95C Length 108 mm Width 35 mm Height 38 mm Weight 340 g

Tattu R-Line batteries Specifically for UAV use, the Tattu brand has designed new batteries of unrivalled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy rigs for computing applications. Batteries often look similar from the outside - their real strength, however, lies inside. The cells in Tattu batteries are developed specifically for UAV requirements. Safety manual Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 22,2 V Capacity 550 mAh Number of cells 6 Balancer plug type JST-XHR Discharge current (continuous) 95C Length 61 mm Width 17 mm Height 40 mm Weight 86 g

Tattu R-Line 4.0 1050mAh 22.2V 130C 6S1P XT60 battery Specifically for UAV use, the Tattu brand has designed new batteries with unrivaled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy rigs for computing applications. Batteries often look similar from the outside - their true strength, however, lies inside. The cells in Tattu batteries are developed specifically for UAV requirements. Safety instructions Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in the charging mode of lithium-polymer packs. Do not short-circuit terminals, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers. Voltage 22.2 V Capacity 1050 mAh Number of cells 6 Balancer plug type JST-XHR Connector plug type XT60 Discharge current (continuous) 130C Discharge current (peak) 260C Length 78 mm Width 40 mm Height 34 mm Weight 180 g

Piston Pin 21XZ-R